Reference: OLEJKOMPRESOR_0,5-L
Synthetic oil for compressor
Synthetic triester based compressor oil suitable for use in reciprocating compressors. The oil has an extremely high auto-ignition temperature of +420 °C.
Reference: OLEJKOMPRESOR_0,5-L
Synthetic triester based compressor oil suitable for use in reciprocating compressors. The oil has an extremely high auto-ignition temperature of +420 °C.
Reference: ACTIVECOALSILEXTRA_0,5-L-0,25-KG
Refill the filter according to service manual.
Reference: SILICAGELSGB2_0,5-L
Refill the filter according to service manual.
Reference: SITOMIKRO_0,5-L-0,45-KG
Micromolecular sieve - for filtration of moisture during filling of cylinders with air by high pressure compressor.
Reference: D05R
Oxygen sensor with MOLEX connection suitable for CCR and analyzers
Reliable continuous mixing equipment "mixer" for the production of Nitrox mixtures in a simple "BASE" design. Ideal for home "mixing".
The mixing device is connected between a compressed oxygen bottle and a high pressure compressor. It ensures precise mixing of the correct set medium, which is then sucked up by the compressor, compressed and squeezed into the pressurized diving cylinder.
This method of mixing mixtures is not only very safe, but is also easy to operate and maintain the system.
Every molecule of each oxygen cylinder is used to the last molecule. No more boosters or expensive "waste".
The mixer is limited to 40% oxygen in the mixture. The limit can be increased to 50% on request (if legislation at the point of use allows).
The compressor of any brand used may have a capacity of 100 to 300 l/min. The mixer is fully air permeable when not in use and therefore air filling is not impeded in any way.
Supplied with all necessary accessories - stainless steel mixer itself with integrated oxygen analyzer, air intake filter, hoses, oxygen control valve and Nitrox mixing table.
The BASE kit does not include EM safety valves, ensuring that the 42% oxygen content of the mixture is not exceeded, or other alarms. Constant monitoring is required.
All LMNT products meet the prescribed standards and are CE certified
Reference: GENIUSN
Brand: LMNT
Reliable continuous mixing plant "mixer" for the production of Nitrox mixtures up to 40 % O2.
Reference: D02
Brand: ITG
O2 Sensor Type D-02 for Dräger Oxygauge with single cathode/R-15.d Vandergraph.
Reference: ZIPDEOX
Brand: NUVAIR
The ZIP oxygen analyser is used to measure the oxygen content of gases such as Nitrox, Heliox and Trimix. The measurement is digital and is made on the basis of a previous calibration of the instrument. The value is displayed as a percentage with resolution to tenths.
Reference: NUVAIRPRO
Brand: NUVAIR
The Nuvair Pro O2 Handheld Analyzer measures oxygen levels in mixed gases from 1% to 100% oxygen. It comes with a water- and impact-resistant case and is available in three power options: Wall plug-in, 9-volt or rechargeable lithium battery.
Reference: 9507M
Brand: NUVAIR
The Nuvair 9507M replacement oxygen sensor is for use with the Nuvair Pro O2 Alarm (both handheld and panel mount models) oxygen analyzer and Nuvair Pro Trimix gas analyzer.
Reference: KING
Brand: LMNT
Reliable continuous mixing plant "mixer" for the production of Nitrox and Trimix mixtures in professional design.
Reference: M03
Brand: ITG
Oxygen sensor M-03 for oxygen analyzers in medical and industrial applications.
Reference: APD14
Brand: ITG
O2 oxygen sensor Typ AP14 for Buddy Inspiration.
Reference: D40
Brand: ITG
The NRC O2 sensor type D-40. The exchange sensor for Analox O2 EII Analyzer.